2018 Good Quality Injection Machine Heater - Ceramic Band Heater – PAMAENS TECHNOLOGY

Specification

Item Name

Ceramic Band Heater

Item No.

PM-CBH

Voltage

6~650 V, 1 or 3 phase

Wattage

Customized

Maximum wattage density

5 w/sq cm

Construction

1- or 2-piece or 4-piece

Standard Thickness

 0.5 inch

Sheath temperature

600°C

Max. operating temp:

800°C

Wattage tolerance

+/- 5%

Certificates

CE, RoHs

Packaging

Fumigation free wooden case

Material

Core

Cr20Ni80, high quality Swedish resistance wire is avalible

Sheath material

SS304, SS201,zinc coating ss sheet

Insulation

High quality steatite ceramics

Accessories Information

Connection

Connection box, direct wire, ceramic wiring block, binding posts, plugs etc

High temperature wire

Fiber glass wire, stainless steel braided wire, Armour cable etc

Introductions of Ceramic Band Heater

Extruder Ceramic Band Heaters are specifically designed for high operating temperature applications. The external temperature of a ceramic band is approximately 400°F while the operating temperature can reach approximately 1400°F. Ceramic bands are manufactured with a stainless steel cover and are fiber insulated preventing heat loss making them highly energy efficient and reducing operating costs. The interlocking ceramics make these heaters flexible, less prone to expansion problems and with a good thermal conductivity, the fitting around a barrel is less critical than a Mica band. Ceramic Barrel Heater Bands are easy to install and have a long functional life.

The feature of Ceramic Band Heater

Sheath temperature: up to 600°C

Maximum watts per square inches are determined by the diameter, width and application.

Manufactured with steatite ceramics

Also available in High Temperature

Ceramic heaters are coiled with Cr20Ni80 wire

Maximum Operating temperature is 600°C.

Unaffected by expansion of cylinder being heated

Easy to install – open up and wrap around cylinder

The applications of Ceramic Band Heater

Plastic Extrusion

Injection Molding

Blow-Molding

Pressure Molding

Structural Foam

Food Industry

Container Pipe and Tank Heating

Packaging

Chemical, Oil & Gas Industries

Attributes of Ceramic Band Heater

1- or 2-piece or 4-piece construction

Partial coverage

Exterior cover:304 stainless steel

A shroud of 304 stainless steel is placed on inside for protection

Minimum standard diameter:30mm (consult factory for smaller diameter)

Minimum standard width: 25mm (consult factory for smaller width)

Thickness: 0.5″

RFQ

1. Diameter and width

2. Voltage & wattage

3. Connection type

4. Wire length if have

5. Position of thermocouple holes if have

6. Polished or un polished

7. Quantity