Chinese Professional 16mm Enail Coil Heater - silicone heater – PAMAENS TECHNOLOGY

Specification

Item Name

Silicone Heater

Item No.

PM-SH

Voltage

12V – 240V

Wattage

Customized

Max wattage density

6 w/sq cm depending on application

Resistance Tolerance

about +/- 5%

Dimensions

Customized

Max. Operation Temp:

260 Deg C or 500 Deg F

Min. Operation Temp:

-50 Deg C or -58 Deg F

Standard Thickness

1.5 -5mm

Certificates

CE

Packaging

Carton box / Fumigation free wooden cas

Material

Internal layer

Silicone rubber / glass fiber reinforced silicone rubber

Middle layer

Heating wire

External layer

Silicone rubber / glass fiber reinforced silicone rubber

Material Properties

Flame Retardant, and moisture proof

Accessories Information

Temperature control

Thermal fuse, thermostat, thermistor and PT100

Power cord

one to three meters with customized plug

Introductions of Silicone Heater

Silicone Heater is a kind of thin film which heats upon electrified, in a standard thickness of 1.5 to 5 mm, adopting nickel chrome wires or 0.05 mm~0.10mm thick nickel chrome foils etched to some certain shapes, the heating component is wrapped with heat conducting and insulating materials on both sides, and completed in high-temperature die forming and aging heat treatment. Due to its high reliability, the product is highly competitive when comparing with other electric heating film products which normally have paste materials such as graphite paste or resistor paste, etc. coated on insulation materials. As a kind of soft red film which can be applied closely on different curved surfaces, the silicon rubber heater can be fabricated in varies shapes and powers.

The feature of Silicone Heater

1. Fast heating with a coefficient of heat conductivity of only 1w/m.k. Due to its small thermal capacity, prompt turn on/off can be achieved.

2. High thermal efficiency: The temperature of electric heating film itself is only tens of cent degrees higher than that of the liquid when heating, which is 2-3 times energy saving than ordinary electric stoves.

3. Water, acid and alkali resistance, high-strength of electric insulation.

4. High mechanical strength with 100 kg/cm² mechanical pressure.

5. Small size: Small space occupied when applying this heating product.

6. Easy application: Its self-insulation and free-of-open-fire property greatly help simplify the techniques of heat preservation and thermal insulation.

7. Its wide range of temperature,-60°C~250°C, can not be simply achieved by other electrical appliances.

8. Long service time: Under normal use, the product almost can be permanently and continuously used because nickel and chrome materials are durable to any corrosion, and the silastic has a high surface resistance up to 100kg/cm², which is uncomparable for any other electric heaters.

9. Made in any size, the temperature of the product can be precisely adjusted by temperature controller.

Applications of Silicone Heater

1. Industrial equipment, pipelines, barrels, tanks, etc.   

2. Outdoors telecommunication equipment

3. Medical equipment and devices   

4. Outdoors electronic devices

5.Thermal imaging of imaging equipment

6. Case protection under cold and moist environment    

7. Industrial ovens and thermal processing equipment

8. Ventilator supports    

9. Laminating equipment

10. Vessels

RFQ

1. Dimension of the tank

2. Voltage & Wattage

3. What kind of material inside the tank

4. What’s the initial temperature of the material