Discount wholesale Temperature Control Fan Heater - Ceramic Band Heater – PAMAENS TECHNOLOGY Detail:
Specification |
|
Item Name |
Ceramic Band Heater |
Item No. |
PM-CBH |
Voltage |
6~650 V, 1 or 3 phase |
Wattage |
Customized |
Maximum wattage density |
5 w/sq cm |
Construction |
1- or 2-piece or 4-piece |
Standard Thickness |
0.5 inch |
Sheath temperature |
600°C |
Max. operating temp: |
800°C |
Wattage tolerance |
+/- 5% |
Certificates |
CE, RoHs |
Packaging |
Fumigation free wooden case |
Material |
|
Core |
Cr20Ni80, high quality Swedish resistance wire is avalible |
Sheath material |
SS304, SS201,zinc coating ss sheet |
Insulation |
High quality steatite ceramics |
Accessories Information |
|
Connection |
Connection box, direct wire, ceramic wiring block, binding posts, plugs etc |
High temperature wire |
Fiber glass wire, stainless steel braided wire, Armour cable etc |
Introductions of Ceramic Band Heater |
|
Extruder Ceramic Band Heaters are specifically designed for high operating temperature applications. The external temperature of a ceramic band is approximately 400°F while the operating temperature can reach approximately 1400°F. Ceramic bands are manufactured with a stainless steel cover and are fiber insulated preventing heat loss making them highly energy efficient and reducing operating costs. The interlocking ceramics make these heaters flexible, less prone to expansion problems and with a good thermal conductivity, the fitting around a barrel is less critical than a Mica band. Ceramic Barrel Heater Bands are easy to install and have a long functional life. |
|
The feature of Ceramic Band Heater |
|
Sheath temperature: up to 600°C |
|
Maximum watts per square inches are determined by the diameter, width and application. |
|
Manufactured with steatite ceramics |
|
Also available in High Temperature |
|
Ceramic heaters are coiled with Cr20Ni80 wire |
|
Maximum Operating temperature is 600°C. |
|
Unaffected by expansion of cylinder being heated |
|
Easy to install – open up and wrap around cylinder |
|
The applications of Ceramic Band Heater |
|
Plastic Extrusion |
|
Injection Molding |
|
Blow-Molding |
|
Pressure Molding |
|
Structural Foam |
|
Food Industry |
|
Container Pipe and Tank Heating |
|
Packaging |
|
Chemical, Oil & Gas Industries |
|
Attributes of Ceramic Band Heater |
|
1- or 2-piece or 4-piece construction |
|
Partial coverage |
|
Exterior cover:304 stainless steel |
|
A shroud of 304 stainless steel is placed on inside for protection |
|
Minimum standard diameter:30mm (consult factory for smaller diameter) |
|
Minimum standard width: 25mm (consult factory for smaller width) |
|
Thickness: 0.5″ |
|
RFQ |
|
1. Diameter and width |
|
2. Voltage & wattage |
|
3. Connection type |
|
4. Wire length if have |
|
5. Position of thermocouple holes if have |
|
6. Polished or un polished |
|
7. Quantity |
Product detail pictures:
Related Product Guide:
How Do Tankless Coil and Indirect Water Heaters Work?
Tank Water Heaters: An Introduction
Discount wholesale Temperature Control Fan Heater - Ceramic Band Heater – PAMAENS TECHNOLOGY, The product will supply to all over the world, such as: , , ,
By from -
By from -