Factory supplied Carbon Infrared Heater - Mica Band Heater – PAMAENS TECHNOLOGY

Short Description:

Product Detail

Product Tags

Feedback (2)

, , ,

Factory supplied Carbon Infrared Heater - Mica Band Heater – PAMAENS TECHNOLOGY Detail:

Specification
Item Name	Mica Band Heater
Item No.	PM-MBH
Voltage	6~650 V, 1 or 3 phase
Wattage	Customized
Construction	1- or 2-piece or 4-piece
Standard Thickness	0.205in +/- 0.003 in
Maximum wattage density	5 w/sq cm
Sheath temperature	600°C
Max. operating temp:	600°C
Wattage tolerance	+/- 5%
Certificates	CE, RoHs
Packaging	Fumigation free wooden case
Material
Core	Cr20Ni80, high quality Swedish resistance wire is avalible
Sheath material	SS304, SS201,zinc coating ss sheet
Insulation	High quality mica sheet
Accessories Information
Connection	Connection box, direct wire, ceramic wiring block, binding posts, plugs etc
High temperature wire	Fiber glass wire, stainless steel braided wire, Armour cable etc
Introductions of Mica Band Heater
Mica Band Heater Elements are utilized in applications across various industries, and extensively in the plastics industry which are installed on cylinder forms such as barrels, pipes and nozzles of injection molding or extrusion machines. Mica band heaters are capable of sheath temperatures up to 1200°F (650°C) with stainless steel sheath, or 900°F (480°C) with aluminized steel sheath. A variety of heater constructions are available, with many termination and clamping options.
The feature of Mica Band Heater
1. Heat-resistant, endure high temperature as 600°C.
2. Good insulation property, insulation resistance is bigger than 100.
3. Light weight, thin thickness, small volume, big power.
4. Mica band heater can be easily designed any shapes according to demand, low cost.
The applications of Mica Band Heater
Plastic Extrusion
Injection Molding
Blow-Molding
Pressure Molding
Structural Foam
Food Industry
Container Pipe and Tank Heating
Packaging
Chemical, Oil & Gas Industries
Attributes of Mica Band Heater
1- or 2-piece or 4-piece construction
Partial coverage
Exterior cover:304 stainless steel
A shroud of 304 stainless steel is placed on inside for protection
Minimum standard diameter:20 mm (consult factory for smaller diameter)
Minimum standard width: 20 mm (consult factory for smaller width)
Thickness: 0.205in +/- 0.003 in
RFQ
1. Diameter and width
2. Voltage & wattage
3. Connection type
4. Wire length if have
5. Position of thermocouple holes if have
6. Polished or un polished
7. Quantity