Rapid Delivery for Flexible Silicone Oil Drum Heater - Air Cooled Band Heater – PAMAENS TECHNOLOGY Detail:
Specification |
|
Item Name |
Air Cooled Band Heater |
Item No. |
PM-ACBH |
Voltage |
110 V ~ 650 V, 1 or 3 phase |
Wattage |
Customized |
Maximum wattage density |
5 w/sq cm |
Types: |
Air cooled ceramic heater, Air cooled ceramic heater with ceramic fins, Air cooled ceramic heater with copper fins, Air cooled ceramic heater with nickel plated copper fins, Air cooled ceramic heater with aluminum fins |
Fins width |
45mm, 60mm & 75mm |
Sheath temperature |
600°C |
Max. operating temp: |
500°C |
Wattage tolerance |
+/- 5% |
Certificates |
CE, RoHs |
Packaging |
Fumigation free wooden case |
Material |
|
Core |
Cr20Ni80 |
Fins material |
Copper, nickel coated copper, ceramic, aluminum etc |
Shroud |
Stainless steel 304 |
Accessories Information |
|
Connection |
Connection box |
High temperature wire |
Fiber glass wire, stainless steel braided wire, Armour cable etc |
Air cooling fans |
Optional |
Introductions of Air Cooled Band Heater |
|
Heating & Cooling System is 60% open by perforated metal sheet which ensures maximum surface exposure for better cooling. The heater band is covered with Blower cover for mounting the Blower. Advantages of air cooled over liquid cooled operation includes lower cost, easy replacement, low maintenance, no leakage problem and uniform temperature control. Additionally, Heating & Cooling Systems do not require an expensive cooling tower or heat exchange system, extensive plumbing systems and labor for installation. These factors along with the benefit of being maintenance free make Air Cooled Band Heaters an economical and practical source for your extrusion heating and cooling application. |
|
The feature of Air Cooled Band Heater |
|
To heat and cool the barrel |
|
Low Maintenance |
|
Easy Replacement |
|
Improves Quality of finished products |
|
Space Saving |
|
Increases Productivity |
|
Available with Various Diameter, Length, Voltage, Wattage and Configurations. |
|
Perforated heater with fins to provide faster cooling. |
|
The applications of Ceramic Band Heater |
|
Plastic Extrusion |
|
Injection Molding |
|
Blow-Molding |
|
Pressure Molding |
|
Structural Foam |
|
Food Industry |
|
Container Pipe and Tank Heating |
|
Packaging |
|
Chemical, Oil & Gas Industries |
|
Attributes of Air Cooled Band Heater |
|
These Fins are available in width of 45 mm, 60 mm & 75 mm. |
|
Aluminum Fins take 25% & Copper fins takes 35% less time to reach set temperature of 350° C than standard Fins. |
|
Aluminum Fins take 30% & Copper fins takes 35% less time for cooling from 350° C to 100° C than standard Fins. |
|
If working temperature requirement is around 300° to 350° C, it is recommended to use Aluminium Fins as it is cost wise economical. |
|
Aluminum & Copper cooling fins have a maximum operating temperature of 450° C. |
|
These fins can also be used in mounting between heaters as cooling fins. |
|
RFQ |
|
1. Diameter and width |
|
2. Voltage & wattage |
|
3. Fins type |
|
4. Wire length if have |
|
5. Position of thermocouple holes if have |
|
6. Polished or un polished |
|
7. Quantity |
Product detail pictures:
Related Product Guide:
Tank Water Heaters: An Introduction
Tips For Safely Using Drum Heaters
Rapid Delivery for Flexible Silicone Oil Drum Heater - Air Cooled Band Heater – PAMAENS TECHNOLOGY, The product will supply to all over the world, such as: , , ,
By from -
By from -